Quick Answer: How Much Light Do I Need In A Room?

How much light do I need for my room calculator?

To determine the needed lumens, you will need to multiply your room square footage by your room foot-candle requirement.

For example, a 100 square foot living room, which needs 10-20 foot-candles, will need 1,000-2,000 lumens.

A 100 square foot dining room, which needs 30-40 foot-candles, will need 3,000-4,000 lumens..

How bright should a bedroom light be?

For a room with decent natural light, that should be around 60 watts. For a room with few/no windows, balance the 60 watt desk light with ambient overhead lights or bump that number up to 75 watts. … – Kitchen Kitchen lights should be bright because you are working with knives and other cooking materials.

Should I use 4 inch or 6 inch recessed lights?

4 inch lighting takes up considerably less space than 6 inch options or regular lighting. This makes it ideal for small rooms and surfaces where even an inch of space makes a big difference. … Increased home value: Well installed and aesthetically placed recessed lights can raise the value of your home.

Which color light is best for bedroom?

Soft white/warm white (2700 Kelvins): Best for bedrooms and living rooms; providing a traditional warm, cozy feel to them. Bright white/cool white (4100 Kelvins): Best in kitchens, bathrooms or garages; giving rooms a whiter, more energetic feel.

How many can lights in a 20×20 room?

Also, how many can lights in a 20×20 room? If you have a center light fixture, you should be able to use the 4 4″ line voltage cans or low voltage for supplemental lighting. for a 20 foot room i would go with at least 8 three inch cans.

Is 400 lumens a lot?

A standard 40-watt (40W) bulb is equal to 400+ lumens. Typically, the higher the wattage, the higher the lumens, and the more light output.

How many lumens does a 12×12 room need?

For the average living room of 250 square feet, you’ll need 5,000 lumens as your primary light source (20 lumens x 250 square feet), equivalent to about five 100 watt incandescent light bulbs, five 23 watt CFLs, or eight 10 watt LED light bulbs.

Where should light be placed in a room?

“Ideally, lights should be below your eye level,” says Adelman. “Set up task lights under the stove range or cabinets to light countertops.” In living rooms, use a combination of floor lamps, table lamps, and down-lights (recessed or track lighting). “Here the lighting should be part of the decor,” says Galuppi.

Is 3000 lumens too bright?

In other words, 3,000 lumens is meant to give a room a brighter light. This is not ideal if you have a small room and it’s a bedroom. You don’t want to blind your eyes when you’re about to go to bed. On the other hand, 2,000 lumens is ideal if you wish to light up a 200 square-foot living room.

What type of lighting is best for bedrooms?

The 9 Best Lighting Picks for Your BedroomRecessed Fixtures. 1/9. Like any other room, a bedroom needs general lighting. … Sconces. 2/9. Wall sconces on either side of the bed can make nighttime reading all the more enjoyable. … Ceiling Fans. 3/9. … Table Lamps. 4/9. … Pendants. 5/9. … Portable Reading Lights. 6/9. … Standing Lamps. 7/9. … Rope Lighting. 8/9.More items…

What is the best lighting for a living room?

Lumens: Ambient lighting for a living room should be 1,500-3,000 lumens. Task lighting for reading should be a minimum of 400 lumens.

How many lumens should a bedroom have?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.